800W Variable Speed Drywall Sander

The 800W variable speed drywall sander built for smoother walls in less time.

This 800W drywall sander runs from 1200 to 2300 RPM with a built-in vacuum system that pulls dust as you work. It is suited for renovation crews, contractors, and homeowners tackling drywall, ceilings, and plaster across rooms, hallways, and stairwells. Variable speed control keeps the abrasive matched to the surface, so you can move from rough leveling to fine finishing without swapping tools.

Why this drywall sander works

• Variable speed 1200 to 2300 RPM: dial down for delicate joint compound, dial up to flatten high spots quickly.
• Built-in vacuum extraction: the dust collection port pulls debris during sanding to keep the workspace cleaner and improve visibility.
• 800W brushed motor: consistent torque under load means the disc keeps spinning even when you lean into stubborn ridges.
• Ergonomic handle and reach: the extended body lets you sand ceilings and high walls without constantly repositioning a ladder.
• Compatible with standard hook-and-loop discs: swap grits in seconds when you move between coats.
• Renovation-ready: ideal for new construction, remodels, repaint prep, and patch work on existing drywall.

Specs and details

• Motor power: 800W
• Speed range: 1200 to 2300 RPM (variable)
• Dust collection: built-in vacuum port
• Motor type: brushed
• Use case: drywall, ceiling, and plaster sanding
• SKU: D0102HGJVKV-Default
• GTIN: 840281577170

Round out the toolkit with our 1-Inch Drive Air Impact Wrench.

Frequently asked questions

Is this drywall sander good for ceilings?
Yes. The long handle and balanced head are designed to reach overhead surfaces, and the dust extraction port helps keep falling debris off your face and floor.

What grit sandpaper should I use with it?
For initial smoothing of joint compound, 80 to 120 grit is common. For final pre-paint finishing, step up to 180 to 220 grit. The hook-and-loop pad accepts standard discs.

Does the built-in vacuum replace a shop vac?
The integrated extraction handles a large share of the dust on its own. For very long sessions or large remodels, you can still connect a separate shop vac to the dust port for higher capacity.

Can I use it on plaster and skim coat?
Yes. The variable speed control is exactly why this tool works on softer surfaces. Start at the lowest speed on plaster or thin skim coat so you do not gouge the surface.