39.6" x 2" Hammer-in Garden Borders

The hammer-in garden borders pack gives you a clean steel edge between lawn, mulch beds, and walkways without trenching or digging.

Each section measures 39.6 inches by 2 inches, with built-in spikes that drive straight into the soil with a rubber mallet. The pack of 10 sections, in a rustic brown finish, lines roughly 33 feet of border once joined edge to edge, holding a crisp line as the season changes.

Why these hammer-in garden borders work

• Drive-in install: no trenching or digging. Tap the spikes into the soil with a mallet.
• Bendable steel: follows gentle curves around beds, trees, and paths without crimping.
• Rustic brown finish: reads as a natural earth tone next to mulch and stone, not a shiny metal stripe.
• Hold the line: stays in place under foot traffic and mowing along the edge.
• 10-section pack: covers about 33 feet of border, enough for a typical front-yard bed run.

Specs and details

• Section size: 39.6 inches long by 2 inches tall (4.5 inches including spikes)
• Sections per pack: 10
• Approximate total length: 33 feet
• Color: rustic brown
• Material: steel
• Install method: hammer-in spikes

Frequently asked questions

How do I install hammer-in garden borders?
Mark your border line, set the first section against the soil, and drive the spikes in with a rubber mallet. Lock the next section into the connector and repeat along the line.

Can I bend the edging to follow a curve?
Yes. The steel is bendable enough to follow gentle curves around beds, trees, and walkway corners. Avoid sharp kinks at a single point.

Will the edging stay put under mowing?
The spike depth is set so the visible blade sits roughly two inches above grade. Mow along the edge as normal. A string trimmer cleans up grass that creeps over the top.

How much border length does one pack cover?
Ten sections at 39.6 inches each link up to roughly 33 feet, which is enough for a typical bed run along a path or driveway edge.