TrueDetect Carbon Monoxide Detector 2.0

Plug-in carbon monoxide detector with temperature and humidity readout.

The TrueDetect Carbon Monoxide Detector 2.0 monitors CO levels in real time and sounds an alarm if a dangerous level is detected. The built-in display also reports temperature and humidity, so you get a single device for room safety and comfort at a glance. Available in US, EU, and UK plug formats with single and multi-pack options.

Why the TrueDetect carbon monoxide detector?

• Real-time CO monitoring: continuous reading with an audible alarm when CO is detected.
• 3-in-1 display: shows CO level alongside temperature and humidity.
• Plug-in install: no batteries, plugs directly into a wall outlet.
• Sized for any home: single, 2-pack, and 3-pack options for one-room or whole-floor coverage.

Specs and details

• Type: plug-in carbon monoxide detector with temperature and humidity sensors
• Alarm: audible warning when CO is detected
• Plug variants: US, EU, UK
• Pack sizes: 1, 2, and 3 units

Pair it with our Under-Sink Leak Detector Alarm for wider home hazard coverage.

Frequently asked questions

Where should I place a carbon monoxide detector?
The CDC and most fire safety agencies recommend a CO detector on every level of the home and outside each sleeping area. Plug it into a wall outlet that is not blocked by furniture or curtains so the sensor and display are unobstructed.

How long does a carbon monoxide detector last?
Most CO detectors are rated for 5 to 10 years of sensor life. Check the unit periodically with the test button and replace the detector when it reaches the end-of-life signal listed in the included instructions.

What is the difference between a CO detector and a smoke detector?
A smoke detector reacts to particles from fire. A CO detector reacts to carbon monoxide gas, which is invisible and odorless. Most homes need both because they sense different hazards.

Can I test the alarm?
Yes. Press the test button to confirm the alarm sounds. Run the test on a regular schedule, for example once a month, to make sure the detector is working.