Portable Manual Tire Changer Tool

The Portable Manual Tire Changer Tool breaks beads and mounts tires from 203 mm to 406 mm without electricity, hydraulics, or a shop air line.

Bolt the base to a flat slab or a stout workbench, drop a wheel on the spindle, and lever the bead off with the included bar. It works for car wheels, trailer wheels, ATV tires, and small truck tires, which makes it a solid pick for a home shop, a trailer fleet, or a remote site without power.

Why this manual tire changer works

• Bead breaker arm: long lever multiplies hand force so stuck beads release without a power tool.
• 203 to 406 mm range: covers 8 to 16 inch tires across cars, trailers, ATVs, and small trucks.
• No power required: works off-grid for jobsites, ranches, and roadside repair calls.
• Bolt-down base: mounts to concrete or a heavy bench so the tool stays steady under the lever load.
• Compact storage: takes up less space than a powered tire machine and stores upright between jobs.

Specs and details

• Tire range: 8 to 16 inches (203 to 406 mm)
• Operation: fully manual, hand lever
• Mounting: bolt-down base for concrete or heavy bench
• Applications: car, trailer, ATV, small truck tires
• SKU: D0102HPCW0T
• Use: home shop, trailer fleet, remote site, mobile repair

Round out the toolkit with our 10-Piece Ball Joint Press Kit.

Frequently asked questions

What tire sizes does this fit?
The tool fits tires between 203 mm and 406 mm, which is roughly 8 to 16 inches. That covers most passenger car wheels, trailer wheels, ATV tires, and many small truck tires. It does not fit very large pickup or commercial truck tires.

Do I need to bolt it down to use it?
Yes for stuck beads. The lever generates enough force that an unbolted base will rock or skid. Bolt it to a concrete slab, a steel plate, or a heavy workbench before you start a tough bead break.

Can it mount low-profile or run-flat tires?
It can handle many passenger tires, but stiff sidewalls on low-profile and run-flat tires need a powered tire machine for clean mounting. Use the manual changer for trailer, ATV, light truck, and standard passenger tires.

Do I need a tire iron or extra tools?
The included bar handles bead breaking and lifting the bead over the rim. Add a small can of tire mounting paste, a valve core tool, and an air source to seat the bead after the new tire is on the rim.